Vapeciga vv mods impressed since joining the vaping market and not really make a misstep. Of course, the first product to enter the heads of most people when Dovpo mentioned are the superstructure but were responsible for this very good RDA, RTA, fully regulated and potentiometer devices, and always at a fair price.
Here is the new RTA BLOTTO which is a collaboration with Sam Parsons also known as vaping Bogan and I promise I will not say the f *** did during this review. Blotto is designed to detect if a building of the house of the victim single hole or double airflow beehive style and cover the air 242 degrees (do not forget the two additional degrees, very lmao important).
It comes with 2 ml glass is installed according to TPD, but placed bubbles drinking glass and Ultem. There is a lot of hype about it will not affect the way I found BLOTTO could crack!
1 × Blotto (RTA pre-installed tubes 2ml)
1 x 6 ml bubble tube glass
1 x bubble tube 6 ml Ultem
1 x accessory bag
1 x Manual
1 x opener
The squonk vape show new is delivered in a cardboard box with a transparent plastic cover so you can see the RTA before the opening, there are many brands as well as all the usual specifications, etc. in the package.
The BLOTTO is available in three different colors, I received the gun metal, but is also available in silver and black. Dripping Council and adequate Goon 810 is a very nice looking with a money metal band around and opaque version in silver and black metal Ultem appearance of firearms.
I like the look of BLOTTO, as it has a very distinctive look, both in appearance and basic as bottle caps. the base has a dual air flow that the two lines of numerous small inlet holes (called honeycomb) and vaping Bogan skull visible in the room. The BLOTTO is pre-installed with 2 ml (glass and other) and just reached the bottom of our brand, and safety pins 510. gold build quality is good, clean and had a wire.
Blotto specifications and features:
Size: 26.0 (25.5 mm on the same basis) x 54.5mm (with tube 2 ml) / 32.0 × 54.5mm (with tube 6 ml)
Type: PDT edition 2 ml; 2 ml Standard Edition
Capacity: 2 ml (6 ml Ultem additional glass tube and the glass tube 6 ml of bubbles included)
Build a platform: a double coil or single coil holder
242 °, the air flow system
It is easy to fill in the e-juice.
double diffusion airflow for gentle aspiration
Color: Gun Metal, Silver, Black
It’s different parts and receiving
a tip of 810 drops look good, but the low profile that does not work all the costumes world and there is no end or falls 510 adapter is included, of course, you can customize cleaning. then we have a cover plate of the upper bottle cap followed by a section with a port jus and space. This is followed by the base of the floating bridge, we have a gold standard plated pin 510 mounted support. space screw section of the platform and the glass and sealed top down with the O-ring is ensured. It is advertised as a settlement pre-installed 2 ml glass PDT right, but I found a 3 ml in him no problem. Also they receive two glass with a capacity of 6 mL and bubble Ultem. Besides going to the item at its blottoed you will receive double the skull bottle opening the door Bogan as coil wire cutting guide. Although treated with 2 bubble glass and right sides generally it was not surprised by what you get.
adapter 510 and the coils are not only cotton and rings 3 and 4 parts T-piece screw and is slightly different from the choice point drip ,. As for me an RTA should be the same as any other tank if the tank subohm reel comes without protest and did not really see the difference. I feel bad that it was a collaboration with the examiner voice heard tanks sacrifice or cover device that only comes with a single coil / pod and put your name to something that comes with nothing to build if you can ‘t run, no conversation talking about!
The dovpo basium squonk get code used in many others, including several bayonet Zeus RTA RTA to the top as we have seen. I like this method, only a quarter turn and hat. Have a metal plate with two ports kidney shaped charge so large that each bottle will adapt and fill quickly and disorder. A coupling to the upper-cap after filling, again, is only a quarter turn.
incoming airflow is at the bottom, which is like having a double Cyclops in blotto not accept an open slot, it has a honeycomb airflow, line 2 comprises a total of 26 holes on each side. air flow control ring and a hat when arranged only poor quality that does not meet the RTA because it is very clear and moving very smoothly at all.
Air enters through the hole airflow explain and enter the bottom of the platform, just below where the roll / coil will be placed, has the style of the output grid (narrow slots) and increased hands curved to match with the roll / coil sloping outer contour has air outlets more of honeycomb. Air flow is described as “242 ° directly to the coil system air flow” lol I do not know how the scientific process to measure 242 degrees, but let’s say your roll / coil will have plenty of air cover (not to be confused with a lot of air).
See the dome and the room was very large road / central air flow is reduced, so that all the ingredients are there to get a good flavor, simply add your building.
Platform and accumulation
We have a floating platform in vapeciga dovpo 230w and although he did not reel postless the main deck is equipped with the same, but only a slight slope down instead of screws also declined slightly tilted. We have two main post section, comprising the structure of the flow path of air which face each other and each part is divided between negative and positive, and the two lead get mounted thereon.
Flatheads are headless screw my least favorite because I find the checklist and the will of many hexagonal favorites.
Because the coils are equipped as wire needs coil postless bridge-cut pre like this and a real lack of space (when a set double) is really not say that this is suitable for new producers platform, some commentators say it built easily, but they forget that is used to build.
Make three construction when used liquid Ni80 Claptons shown it is a double 3.0ID construction and as seen somewhat narrow and recommend more than twice the construction making use 2.5ID coil. Construction is simple as coils 3.5ID use, which worked fine, but I would try a building with 4.0ID 4.5ID then because in the future I will use as a single coil and RTA BLOTTO want to find the best construction.
A bottle opener is double provided as a guide to cut the wire cutter to bring the right length (two buildings), I personally directories using search cuts cylinders included with some of the RTA and the RDA and cut 5 mm brings me that I determined that the right to build a double if the need to do a compilation of their prospects a little more, but you should use based on the reel handle his judgment.
Wick is easy (I as a style GTA bridge floating) is trained from confinement so only push the cotton knit in the capillary channel and letting gravity do the rest once the saturated cotton which is BLOTTO very soft on the shaft!
My experience using BLOTTO
As mentioned, it made build three, two double and a first program that have found a single construction provides high yields coil, so the RTA to construct single and double gives poor results with two individual accumulation and individual.
I suggest not to actually build a double 3.0ID described as too narrow and makes RTA too tight, even for me as a tight loop. I did a double construction with a mixture 2.5ID Claptons provide the best results for a single building that provides more time BLOTTO taste of the air, but still very limited compared to most DL RTA. In comparison, usually with the RTA it has a good airflow 2/3 open, semi-open or open the third depends on a large tank with BLOTTO but opening a three complete construction.
He stood out for me was the smoothness of topside dual mod click in but I found an air flow honeycomb do not expect half.
As mentioned in the previous section that all the ingredients are there to get a good taste and even the taste was very good with three accumulation than I do, but rather have raptures some people, but just could not find the accumulation and reach to be much simpler coil fan I experience with different 4.0ID and 4.5ID next version is perfect.
I prefer RTA more airflow because I hate e-liquid to get my camera, but after some use had no leakage and there is also a good flood the bridge. I made the third to build a great wrong, I’m a little worried about building dual 3.0ID because there is a lot of cotton and all I’m doing is the end of the boom so that no comb using the mail liquid and 80VG was good without bad arrangement. I would rather see the right glass and luckily they had a little unpleasant when you have is that needs to fill regularly, especially for the construction of a double reported for the 3 ml holding capacity, but with a hat requires quarter turn to remove them, which is a great drama and if you really want more capacity -RIGHT while a selection of 6 ml.
I do not recommend to someone who is new to build some experience would be beneficial before construction BLOTTO but good if you like a challenge, diving right!
Although I am the wow factor in taste (but not much) RTA is very good, just hope more comes with it.
How? ‘Or’ What
Good build quality
See single heading,
It’s good to see FSA (subjective)
It works well with either double or single building
coils setting style Postless
cover 242 degrees of air circulation
Goon beautiful montage 810 to drop by drop Advanced
2 6ml bubbles including spare parts (1 cup, Ultem 1)
cutting guide opening of the bottle / coil wire comprising
Top-cap has a bayonet connection (only a quarter turn to open or secure)
If you like this should be limited spray your street
very good taste (although I have not found so extraordinary that many others)
Very lenient with evacuation
Suffering from zero leaks or flooding
Not suitable for people who like a lot of air (much more limited than most DL RTA)
No coil or cotton plug
510 adapter not included
Drip drop advanced CA, including
A single backup screw and O-ring
In fact, it is not recommended for someone new to the accumulation (narrow space and the need to pre-cut lead)
The preferred hex head screws
3.0ID limited to two accumulation rolls (and even that is quite narrow 2.5ID much better)
control ring airflow nonspecific movement
I would like to thank once again as the Pearl Cigabuy provide BLOTTO RTA review
You can buy here: dovpo box https://www.vapeciga.com/collections/dovpo